What type of Smoke Detectors are on the market and why are they different?

What type of Smoke Detectors are on the market and why are they different?

The most common types of smoke detectors available in New Zealand for the home market are Ionisation and Photoelectric – here we discuss the differences between these.

Ionisation Detectors

Ionisation detectors have an ionisation chamber and a source of ionising radiation. The source of ionising radiation is a minute quantity of americium-241 (perhaps 1/5000th of a gram), which is a source of alpha particles (helium nuclei). The ionisation chamber consists of two plates separated by about a centimeter.

The battery applies a voltage to the plates, charging one plate positive and the other plate negative. Alpha particles constantly released by the americium knock electrons off of the atoms in the air, ionising the oxygen and nitrogen atoms in the chamber.

The positively-charged oxygen and nitrogen atoms are attracted to the negative plate and the electrons are attracted to the positive plate, generating a small, continuous electric current.

When smoke enters the ionisation chamber, the smoke particles attach to the ions and neutralize them, so they do not reach the plate. The drop in current between the plates triggers the alarm.

Photoelectric Detectors

In one type of photoelectric device, smoke can block a light beam. In this case, the reduction in light reaching a photocell sets off the alarm.

In the most common type of photoelectric unit, however, light is scattered by smoke particles onto a photocell, initiating an alarm. In this type of detector there is a T-shaped chamber with a light-emitting diode (LED) that shoots a beam of light across the horizontal bar of the T. A photocell, positioned at the bottom of the vertical base of the T, generates a current when it is exposed to light.

Under smoke-free conditions, the light beam crosses the top of the T in an uninterrupted straight line, not striking the photocell positioned at a right angle below the beam.

When smoke is present, the light is scattered by smoke particles, and some of the light is directed down the vertical part of the T to strike the photocell. When sufficient light hits the cell, the current triggers the alarm.

Which type is better?

Both ionisation and photoelectric detectors are effective smoke sensors. Both types of smoke detectors must pass the same test to be certified as UL smoke detectors.

Ionisation detectors respond more quickly to flaming fires with smaller combustion particles; photoelectric detectors respond more quickly to smoldering fires.

PSL, in keeping with policy from the New Zealand Fire Service recommend the Photoelectric type as a preference.

Comments are closed.